Fiberglass production training video by hand

In this section, you will find the video Fiberglass production training by manual method (hand lay -up) you will see.

Fiberglass production has various methods, some of which require more advanced devices and equipment. As:

Production by injection method (RTM) - Production by twisting method (Filament Winding) - Production by spraying method (Prim) - Production by pressing method (SMC) - and...

In the manual method, due to the fact that this industry can be started with the least amount of capital, it has received a lot of attention from producers, especially in Iran.

Therefore, we intend to film Fiberglass production training to show you manually.

Fiberglass production training

Manual method of producing fiberglass (Hand Lay-up):

This method is not complicated and is suitable for low circulation. This method is used for simple parts that do not have high expectations in terms of mechanical properties, such as floats, boats, pots and chambers, elements, etc.

In this fiberglass production training video, you will learn step by step the manual production method of a fiberglass mold.

In summary, it can be said that the production of fiberglass mold includes the following steps:

• Waxing on the surface of the part that we want to make a mold from. This will help to clean and polish the surface and make it easier to separate the mold from the part.
• Gel coding on the surface of the part, this part is the surface of the part that will be smooth and polished.
• Layering, at this stage, layering is done using glass wool fibers and resin. The number of layering and the type of fibers and resin are different depending on the type and strength of the piece.
• Sanding, to smooth and level the lower part of the work